Question and Answer
Key attributes
Other attributes
Place of Origin：USA
Model Number：416HP X
Color：Natural
Sample：Avaiable
HS CODE：3904690000
CAS No：26655-00-5
Material：PFA
Packaging and delivery
Packaging Details：25KG/BAG ; 40BAG/PALLET
Port：SHENZHEN
Supply Ability
Supply Ability：5000 Kilogram/Kilograms per Month
Product descriptions from the supplier
PFA 416HP X
Packing:25kg/bag
For inventory control purposes, product name may be followed by an X. Products labeled PFA 416HP and PFA 416HP X are equivalent, and all information in this document is applicable to both.
Description: 416HP X
PFA 416HP is a special purpose fluoroplastic resin available in pellet form. This resin has a higher melt flow rate (typical MFR of 42) than most other PFA fluoroplastic resins, which permits higher extrusion speed and easier processing, making PFA 416HP a costeffective alternative for producing thin-wall and complicated articles.
Unlike other high melt flow rate polymers,PFA 416HP is specially formulated to provide a high melt flow rate for processing ease, while still providing good flexural properties and stress-crack resistance. These unique properties, coupled with the resin’s high thermal stability, enable thin coatings of ultra-fine wires and injection molding of complex parts.
The enhanced purity of PFA 416HP makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials.PFA 416HP contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed.PFA 416HP combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Compared to other thermoplastics, the high melt strength and thermal stability of PFA 416HP can be used to improve processing rates, and allows intricate electronics to be insulated with an extremely thin coating and still withstand soldering.
Typical Applications
Applications for PFA 416HP include high performance thinwall wire coatings; intricate injection molded parts for production of chemicals where purity in the parts-per-billion range is needed; semiconductor components and electronic parts; and fluid handling systems for high performance chemical filters. With a typical melt flow rate (MFR) of 42, PFA 416HP resin is ideally suited for applications requiring a high processing speed and very low viscosity.
Processing: 416HP X
PFA 416HP can be processed by conventional melt extrusion, and by injection, compression, and transfer molding processes. High melt strength and heat stability permit the use of relatively large die openings and high temperature draw-down techniques that increase production rates. Reciprocating screw injection molding machines are preferred. Corrosionresistant metals should be used in contact with molten fluoroplastic resin. Extruder barrel should be long, relative to diameter, to provide residence time for heating the resin to approximately 390 °C (730 °F). For more detailed processing information, including recommended draw-down ratios, consult your Chemours sales representative.
Food Contact Compliance
Properly processed products made from PFA 416HP resin can qualify for use in contact with food.
Storage and Handling
Processors must avoid contamination for successful production of high purity products. The properties of PFA 416HP resin are not affected by storage time. Ambient storage conditions should be designed to avoid airborne contamination and water condensation on the resin when it is removed from containers.
Packaging: 416HP X
PFA 416HP is supplied as pellets and is available in 25-kg multilayer bags with an integral polyethylene liner.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.
