DURAFIDE 6165A7 is a polyphenylene sulfide (PPS) product filled with 60% glass mineral. It is available in North America, Europe or Asia Pacific.
PPS DURAFIDE 6165A7 Nippon Polyplastics material performance 60% glass fiber mineral reinforced PPS with excellent dimensional accuracy.
PPS DURAFIDE 6165A7 Polyplastics product introduction:
General name of material: PPS
Material brand name and model: DURAFIDE 6165A7
Material Chinese name: polyphenylene sulfide
Material manufacturer: Japan Polyplastics DURAFIDE
Product packaging: 25KG/BAG
PPS DURAFIDE 6165A7 Polyplastics material introduction:
PPS (polyphenylene sulfide) resin is a high heat-resistant resin, which belongs to super engineering plastics, with excellent flame retardancy, mechanical properties, dimensional stability and chemical resistance. Its melting point is 280 degrees, and its continuous use temperature is 200-240 degrees, showing quite high heat resistance. In addition, it is insoluble in any organic solvents below 200 degrees, and has chemical resistance comparable to fluorine resins. Moreover, the hydrolysis reaction that occurs with polyamide resin and polyester resin does not occur, so it has high long-term reliability.
PPS DURAFIDE 6165A7 Polyplastics Material Properties:
1. The mechanical strength is particularly high, especially its bending strength value is very high, and it has excellent elastic recovery characteristics.
2. Has high toughness, compression properties and shear properties.
3. It still has excellent creep resistance characteristics under high temperature and high load, and also shows excellent fatigue resistance characteristics for cyclic stress.
4. The elongation and impact strength are high, and the brittleness that was considered as a shortcoming of the previous PPS resin has been greatly improved.
5. It can withstand immersion in an electric soldering bath at 260°C for 10 seconds, which is enough to meet the requirements of surface assembly technology for electronic components.
6. There are very few ionic impurities, and it may also be used in fields with very strict requirements on electrical properties.
7. In the state of high humidity and high temperature, the volume resistivity changes very little, and the dielectric constant hardly changes with the cycle number and temperature. As an electrical insulating material, 8. It has very excellent properties.
9. The fusion strength is high, and the secondary processing characteristics such as tapping and pressing are very superior.
PPS DURAFIDE 6165A7 Polyplastics Material Application:
SMT connectors, IC card connectors, modular sockets, motors, electric razors/knife sets, steam blowers, meat grinder blades, pickup bases, electromagnetic relays, water pump inner blades, brush fixing parts, car Lamp reflectors, gears for copiers, fuel pump module parts, mobile navigators/main housings. etc
Supply PPS Japan Polyplastics DURAFIDE model:
GF reinforced high toughness 1130A1 HF2000/HD9050
Standard, low flash 1130A64 HD9100
Special high impact resistance 1130T6 HD9050
GF reinforced high toughness 1140A1 HF2000/HD9050
High Strength 1140A6 HF2000/HD9100
Standard, low flash 1140A64 HF2000/HD9100
Low chlorine 1140A66 HD9100/HD9001
Ultra high flow, low flash 1140A7 HF2000/HD9050
Special conductivity and sliding properties 2130A1 HD9000
Sliding 3130A1 HF2000/HD9100
High Impact 6150T6 HF2000/HD9100
GF/inorganic reinforcement, excellent dimensional accuracy, standard 6165A4 HF2000/HD9050
6165A6 HF2000/HD9100
Excellent dimensional accuracy and low flash 6165A7 HF2000/HD9100
Low Fuel Swell 6165A7S HD9050
Special sliding 6345A4 HF2000/HD9050
GF/inorganic reinforcement, low warpage, good appearance 6465A6 HD9050
6465A62 HF2000/HD9100
Low temperature mold, good adhesion between resins 6565A6 HF2000/HD9050
6565A7 HD9050
Special conductivity, sliding 7140A4 HD9000
Conductive 7340A4 HD9000
Japan-Polyplastics DURAFIDE PPS 6165A7 Physical Properties Table Parameters
Reviews
There are no reviews yet.