Belgium Solvay Amodel AT- 1116 HS is a 16% glass fiber reinforced (PPA) toughened heat stabilized resin, specially designed to meet the needs of high stiffness, high dimensional stability, chemical resistance and ductility. product design. It has a high heat distortion temperature and a high flexural modulus of elasticity. The elongation at break is higher than that of non-toughened glass fiber reinforced PPA. Typical applications include bearings, bearing cages/cages, housings, components for chemical processing equipment, motor mounts, sporting equipment, lawn and garden equipment and components requiring crimp or snap fit. – Black: AT-1116 HS BK 324
SOLVAY (SOLVAY) AMODEL AT-1116HS PPA is a toughened, heat-stabilized, 16% glass-reinforced grade PPA resin, and is also a low-cost solution for applications requiring stiffness, good dimensional stability properties, chemical resistance and ductility. The resin has a higher heat deflection temperature and higher flexural modulus, with greater tensile elongation than untoughened glass-reinforced PPA. Typical applications include bearings, bearing retainers/cages, housings, chemical processing equipment components, motor frames, athletic equipment, lawn and garden equipment and components requiring press fit or lap joint assembly.
The following are the physical properties of Solvay AMODEL AT-1116HS PPA
Thermal performance | dry/wet | unit | Test Criteria |
Melting temperature (10°C/min) | 290 / – | °C | ISO 11357-1/-3 |
Heat deflection temperature (1.80 MPa) | 285/ – | °C | ISO 75-1/-2 |
Heat deflection temperature (8.00 MPa) | 280 / – | °C | ISO 75-1/-2 |
Linear coefficient of thermal expansion (parallel) | 15 / – | E-6/K | ISO 11359-1/-2 |
Linear Coefficient of Thermal Expansion (Vertical) | 70 / – | E-6/K | ISO 11359-1/-2 |
Combustibility at thickness h | HB / – | class | IEC 60695-11-10 |
Thickness of test specimen | 0.8 / – | mm | IEC 60695-11-10 |
Maximum operating temperature (long term) | 160 – 210 | °C | ISO 2578 |
Maximum use temperature (short term) | 210 | °C | SOLVAY |
Mechanical Properties | dry/wet | unit | Test Criteria |
Tensile modulus | 17000 / 16000 | MPa | ISO 527-1/-2 |
Stress at Fracture | 220 / 200 | MPa | ISO 527-1/-2 |
Elongation at break | 2 of 2 | % | ISO 527-1/-2 |
Unnotched Charpy Impact Strength (+23°C) | 70 / 60 | kJ/m2 | ISO 179/1eU |
Charpy impact strength (-30°C) | 50 / 40 | kJ/m2 | ISO 179/1eU |
Charpy notched impact strength (+23°C) | 14 / 13 | kJ/m2 | ISO 179/1eA |
Charpy notched impact strength (-30°C) | 15 / 14 | kJ/m2 | ISO 179/1eA |
SOLVAY AMODEL PPA AT-1116HS Injection Molding Instructions
Injection | rated value | Unit system | |
---|---|---|---|
Drying temperature | 110 | °C | |
Drying time | 4.0 | hr | |
Recommended Maximum Moisture Level | 0.045 | % | |
Barrel rear temperature | 304 to 318 | °C | |
Cylinder front temperature | 316 to 329 | °C | |
Processing (melt) temperature | 321 to 343 | °C | |
Mold temperature | 135 | °C |
The following are the physical properties of Belgium-Solvay Plastics Amodel AT-1116 HS
Reviews
There are no reviews yet.