131 LEXAN™ COPOLYMER

131 LEXAN™ COPOLYMER
Grades Available: 131
Available in: Europe, Asia, Americas

GENERAL INFORMATION
DESCRIPTION
LEXAN resin is a Polycarbonate (PC), amorphous engineering thermoplastic, characterized by outstanding mechanical, optical, electrical and thermal properties. The LEXAN portfolio provides broad design versatility through its wide range of viscosities and product options such as: environmentally conforming flame retardancy, scratch resistance, toughness, heat resistance, weatherability, biocompatibility, optical quality, and compliance with stringent FDA and USP requirements.

123X
Improved flow PC with excellent processability and mold release. UV stabilized.
EUROPEASIAAMERICAS

143X
Improved flow PC with excellent processability and mold release.
EUROPEASIA

4251R
High heat polycarbonate copolymer blend with an excellent balance of heat resistance, processability, and impact strength. Available in a range of opaque colors.
AMERICAS

4501
High heat resistant polyphthalate carbonate, provides DTUL of 290F at 264 psi.
EUROPEASIAAMERICAS

4504
High heat resistant polycarbonate copolymer, provides DTUL of 290F at 264 psi. FDA food contact compliant in limited colors. Effective January 15th, 2008 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HPH4504.
EUROPEASIAAMERICAS

4701R
High heat resistant polyphthalate carbonate, provides DTUL of 300F at 264 psi.
EUROPEASIAAMERICAS

4704
High heat resistant polycarbonate copolymer, provides DTUL of 300F at 264 psi. FDA food contact compliant in limited colors. Effective January 15th, 2008 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HPH4704.
EUROPEASIAAMERICAS

4795R
LEXAN 4795R is a high heat resistant poly(ester)carbonate injection molding resin. Flame Retardant.
EUROPEAMERICAS

923X
LEXAN 923X is based on Polycarbonate (PC) siloxane copolymer resin and is a UV stabilized high flow opaque injection molding (IM) grade. This non-chlorinated, non-brominated flame retardant grade has UL-94 V0 @ 1.5mm flame rating, extreme low temperature ductility (-40°C) characteristics and excellent processability, providing opportunities for shorter IM cycle times d to standard PC. LEXAN 923X resin is available in a wide range of opaque colours and targeted for a wide range of applications.
EUROPEASIAAMERICAS

CFR5630
LEXAN CFR5630 Polycarbonate (PC) is a non-filled resin, suitable for injection molding and extrusion. This non-chlorinated, non-brominated flame retardant PC resin meets FAR25.853 smoke density and 60 second vertical burn and OEM toxicity requirements. LEXAN CFR5630 resin is available in transparent and opaque colors.
EUROPEASIAAMERICAS

CFR5630D
LEXAN CFR5630D Polycarbonate (PC) is a non-filled resin, suitable for injection molding and extrusion. This non-chlorinated, non-brominated flame retardant PC resin meets FAR25.853 smoke density and 60 second vertical burn and OEM toxicity requirements. LEXAN CFR5630D resin is available in 5 prematched diffusion colors.
EUROPEASIAAMERICAS

CFR7431
LEXAN CFR7431 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.2 mm / 5VA rating at 3.0mm and is UV stabilized(F1 rating) providing additional weathering capability. LEXAN CFR7431 is available in clear transparent and tinted color options that is an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

CFR7630
LEXAN CFR7630 Polycarbonate (PC) resin is a non-filled resin, suitable for injection molding and extrusion. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is UV stabilized (F1 rating) providing additional weathering capability. LEXAN CFR7630 resin is available in transparent and opaque colors.
EUROPEASIAAMERICAS

CFR9111
LEXAN CFR9111 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.5 mm and good flow capability. LEXAN CFR9111 is available in clear transparent and tinted color options that is an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

CFR9131
LEXAN CFR9131 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.5 mm, high flow capability and is UV stabilized providing additional weathering capability. LEXAN CFR9131 is available in clear transparent and tinted color options that is an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

CFR9712
LEXAN CFR9712 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 2.0 mm and high flow capability. LEXAN CFR9712 is available in clear transparent and tinted color options that is an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

DMX1435
LEXAN™ DMX1435 is a UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df). It is both transparency and colorable available solutions to the applications such as 5G related devices, anti-scratch covers, etc.
EUROPEASIAAMERICAS

DMX2415
LEXAN DMX2415 is a standard flow Polycarbonate (PC) copolymer resin with improved scratch resistance. This is available in transparent, translucent, and opaque colors.
EUROPEASIAAMERICAS

EXL1112
LEXAN EXL1112 polycarbonate (PC) siloxane copolymer resin is a high flow opaque injection molding (IM) grade. This resin offers good low temperature (-20 C) ductility in combination with excellent processability and release with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1112 resin is a product available in wide range of opaque colors and may be an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

EXL1112A
LEXAN EXL1112A polycarbonate (PC) siloxane copolymer resin is a high flow opaque injection molding (IM) grade. This resin offers good low temperature (-20 C) ductility in combination with excellent processability and release with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1112A resin is a product available in wide range of opaque colors and may be an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

EXL1112T
LEXAN EXL1112T is based on Polycarbonate (PC) siloxane copolymer resin and is a transparent injection molding (IM) grade. This resin offers good low temperature (-20 C) ductility in combination with high flow characteristics and excellent processability, providing opportunities for shorter IM cycle times d to standard PC resins.
EUROPEASIAAMERICAS

EXL1132
LEXAN EXL1132 polycarbonate (PC) siloxane copolymer resin is a high flow, UV stabilized injection molding grade. This resin offers good low temperature (-20 C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1132 resin is a general purpose product available in a wide range of opaque colors and may be an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1132T
LEXAN EXL1132T polycarbonate (PC) siloxane copolymer resin is a UV stabilized transparent injection molding (IM) grade with extra release properties. This resin offers good low temperature (-20 C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC resins. LEXAN EXL1132T resin is a general purpose product available in transparent and opaque colors and may be an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1162T
LEXAN EXL1162T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding (IM) grade with extra release properties. This resin offers good low temperature (-20 C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC resins. LEXAN EXL1162T resin is a general purpose product available in transparent and opaque colors and may be an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1182T
LEXAN EXL1182T polycarbonate (PC) siloxane copolymer resin is a UV stabilized, enhanced release transparent injection molding (IM) grade. This resin offers good low temperature (-20 C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC resins. LEXAN EXL1182T resin is a UV stabilized, enhanced release product available in transparent and opaque colors and may be an excellent candidate for a broad range of applications.
EUROPEAMERICAS

EXL1330
LEXAN EXL1330 polycarbonate (PC) siloxane copolymer resin is a UV stabilized opaque injection molding (IM) and sheet extrusion grade. This resin offers extreme low temperature (-60 C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1330 resin is a general purpose product available in a wide range of opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1413T
LEXAN EXL1413T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers excellent low temperature (-30 °C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1413T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1414
LEXAN EXL1414 polycarbonate (PC) siloxane copolymer resin is a medium flow opaque injection molding (IM) grade. This resin offers extreme low temperature (-40 C) ductility in combination with excellent processability and release with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1414 resin is a product available in wide range of opaque colors and may be an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

EXL1414H
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
EUROPEASIAAMERICAS

EXL1414T
LEXAN EXL1414T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature (-40 °C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1414T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1433T
LEXAN EXL1433T polycarbonate (PC) siloxane copolymer resin is a UV stabilized transparent injection molding grade. This resin offers excellent low temperature (-30 C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1433T resin is a UV stabilized general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1434
LEXAN EXL1434 polycarbonate (PC) siloxane copolymer resin is a medium flow opaque injection molding (IM) grade and is UV stabilized. This resin offers extreme low temperature (-40 C), exhibits excellent processability and release with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1434 resin is a product available in wide range of opaque colors and may be an excellent candidate for a wide variety of applications.
EUROPEASIAAMERICAS

EXL1434T
LEXAN EXL1434T polycarbonate (PC) siloxane copolymer resin is a UV stabilized transparent injection molding grade. This resin offers extreme low temperature (-40 C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1434T resin is a UV stabilized general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1443T
LEXAN EXL1443T polycarbonate (PC) siloxane copolymer resin is an injection molding grade with FDA and EU food contact compliance. This resin offers excellent low temperature (-30 C) ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1443T resin is available in transparent and opaque colors and is an excellent candidate for a broad range of food contact applications.
EUROPEASIAAMERICAS

EXL1444
LEXAN EXL1444 is based on Polycarbonate (PC) siloxane copolymer resin. It is a medium flow, FDA compliant and opaque injection molding (IM) grade. This resin offers extreme low temperature (-40°C) ductility, exhibits excellent processability and release with opportunities for shorter IM cycle times d to standard PC. This product is available in a wide range of opaque colors.
EUROPEASIAAMERICAS

EXL1463T
LEXAN EXL1463T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers excellent low temperature (-30 C) ductility in combination with medium flow characteristics, improved release and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1463T resin is an improved release general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1494T
LEXAN EXL1494T polycarbonate (PC) siloxane copolymer resin is an injection molding grade with FDA and EU food contact compliance. This resin offers extreme low temperature (-40 C) ductility in combination with medium flow characteristics, improved release and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1494T resin is available in transparent and opaque colors and is an excellent candidate for a broad range of food contact applications.
EUROPEASIAAMERICAS

EXL1613T
LEXAN EXL1613T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers extreme low temperature ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL1613T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
ASIA

EXL1810T
LEXAN EXL1810T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers cold temperature (0 °C) ductility in combination with very high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC resin. LEXAN EXL1810T resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
EUROPEASIAAMERICAS

EXL1890T
LEXAN EXL1890T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade for food contact applications. This resin offers cold temperature (0 °C) ductility in combination with very high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC resin. LEXAN EXL1890T resin offers enhanced release performance and is available in transparent colors and is an excellent candidate for a broad range of applications in food handling or food preparation markets.
EUROPEASIAAMERICAS

EXL4016H
6% GF reinforced opaque polycarbonate-siloxane copolymer with good impact strength, stiffness and hydrolytic stability.
EUROPEASIAAMERICAS

EXL4019
LEXAN EXL4019 is an opaque 9% Glass Fiber (GF) reinforced polycarbonate (PC) siloxane copolymer resin for injection molding (IM) applications requiring improved stiffness. This resin also offers improved ductility over conventional GF reinforced PC resins in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times when d to standard PC. LEXAN EXL4019 resin is a product that may be an excellent candidate for a wide variety of applications. Available in limited colors only.
EUROPEASIAAMERICAS

EXL4412
LEXAN EXL4412 copolymer is a 20% glass fiber reinforced Polycarbonate Copolymer, medium flow, impact modified, injection moldable grade. EXL4412 is available in opaque colors only and is an excellent candidate for a broad range of applications that require a combination of stiffness and ductility.
EUROPEASIAAMERICAS

EXL4419
LEXAN EXL4419 polycarbonate (PC) siloxane copolymer resin is a 9% Glass Fiber (GF) reinforced opaque injection molding (IM) grade. This medium flow resin offers much higher ductility, improved release characteristics and excellent processability with opportunities for shorter IM cycle times when d to GF reinforced standard PC resins. LEXAN EXL4419 resin is available in opaque colors only and is an excellent candidate for a broad range of applications that require a combination of stiffness and ductility.
EUROPEASIAAMERICAS

EXL5429
Lexan* EXL5429 polycarbonate (PC) resin is a GF reinforced, UV stabilized, flame retardant injection molding copolymer blend. This medium flow resin features UL94 V0 @ 1.5mm flame retardancy based on non-chlorine, non-bromine FR agents with excellent processability and improved release performance. Available in limited opaque colors.
EUROPE

EXL5429S
LEXAN EXL5429S polycarbonate (PC) resin is a glass fiber reinforced, UV stabilized, flame retardant injection molding copolymer blend. This medium flow resin features (all color rating) UL94 V0 @ 1.5mm flame, RTI(elec.) 130C, based on non-chlorine, non-bromine FR agents with excellent processability and improved release performance. Available in custom opaque colors.
EUROPEASIAAMERICAS

EXL5689
Lexan EXL5689 polycarbonate (PC) resin is a GF reinforced, UV stabilized, flame retardant injection molding copolymer blend. This medium flow resin features UL94 V0 @ 1.5mm flame retardancy based on non-chlorine, non-bromine FR agents with excellent processability and improved release performance. Lexan EXL5689 resin offers much improved impact strength and ductility over conventional GF reinforced PC resins. This product is an excellent candidate for a broad range of applications, including electrical and electronic enclosures among others.
EUROPEASIAAMERICAS

EXL6013
LEXAN EXL6013 is especially developed for applications requiring a high impact performance combined with an improved chemical resistance over standard polycarbonate.
EUROPE

EXL6414
PC-Siloxane copolymer with excellent processability. Impact modified, medium flow, extreme low temp. ductility.
EUROPEASIAAMERICAS

EXL8134
LEXAN EXL8134 is a PC/siloxane copolymer resin with high flow, excellent low temperature impact and 30% post consumer recycle content. Limited availability and restricted color only. Higher color variability and contamination risks including black specs needs to be considered before approval for use in applications.
EUROPEASIA

EXL8414
LEXAN EXL8414 is a PC/siloxane copolymer resin with medium flow, excellent low temperature impact and up to 25% post consumer recycle content. Availability of resin is restricted and lead times are longer due to limited manufacturing capability. Higher color variability and contamination risks including black specs needs to be considered before approval for use in applications. Contact your technical sales representative with questions.
EUROPEASIAAMERICAS

EXL8454
LEXAN EXL8454 is a PC/siloxane copolymer resin with medium flow, excellent low temperature impact and 50% post consumer recycle content. Limited availability and restricted color only. Higher color variability and contamination risks including black specs needs to be considered before approval for use in applications.
EUROPEASIA

EXL8483
LEXAN EXL8483 is a PC/siloxane copolymer resin with medium flow, excellent low temperature impact and 80% post consumer recycle content. Limited availability and restricted color only. Higher color variability and contamination risks including black specs needs to be considered before approval for use in applications.
EUROPEASIA

EXL9111
LEXAN EXL9111 polycarbonate-Siloxane copolymer resin is a high flow, high impact,non-chlorinated, non-brominated flame retardant opaque injection molding (IM) grade.
ASIA

EXL9112
Opaque PC-Siloxane copolymer with excellent processability. Improved flow, low temp. ductility. Non-chlorinated, non-brominated flame retardant product. UL rated V-0/5VA.
EUROPEASIAAMERICAS

EXL9132
Opaque PC-Siloxane copolymer with excellent processability. Improved flow, low temperature ductility, UV stabilized. Non-chlorinated, non-brominated flame retardant product. UL rated V0/5VA.
EUROPEASIAAMERICAS

EXL9134
LEXAN EXL9134 polycarbonate (PC) siloxane copolymer resin is a UV stabilized high flow opaque injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40 deg C) characteristics and excellent processability with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL9134 resin is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.
EUROPEASIAAMERICAS

EXL9330
EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.
EUROPEASIAAMERICAS

EXL9330P
Opaque PC-Siloxane copolymer with excellent processability. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.
EUROPEASIA

EXL9330S
Opaque PC-Siloxane copolymer with excellent processability. UV stabilized. UL rated V-0/5VA/CTI-PLC-2. Available in limited colors; please contact your SABIC IP representative
EUROPEASIAAMERICAS

EXL9414
LEXAN EXL9414 polycarbonate (PC) siloxane copolymer resin is a medium flow, non-chlorinated, non-brominated flame retardant opaque injection molding (IM) grade. This resin offers low temperature ductility, thin wall flame retardant capability, and in combination with excellent processability and release with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL9414 resin is a product available in wide range of opaque colors and may be an excellent candidate for a wide variety of applications, especially the housing of fast-charging mobile phones.
EUROPEASIAAMERICAS

EXL9414P
LEXAN EXL9414P polycarbonate (PC) siloxane copolymer resin is a medium flow, non-chlorinated, non-brominated flame retardant opaque injection molding (IM) grade. This resin offers low temperature ductility, thin wall flame retardant capability, and in combination with excellent processability and release with opportunities for shorter IM cycle times d to standard PC. LEXAN EXL9414P copolymer resin is a product available in wide range of opaque colors and may be an excellent candidate for a wide variety of applications, especially the housing of fast-charging mobile phones.
EUROPEASIAAMERICAS

EXL9414T
LEXAN EXL9414T resin grade is a halogen-free flame retardant polycarbonate featuring transparency, -40 degree C ductility and UL-94 V0 rating for injection molding applications. Excellent impact combined with good flow, all transparent colorability for aesthetics and thin wall flame retradancy makes this product an excellent candidate for thin wall applications.
EUROPEASIA

EXL9414TRC
LEXAN EXL9414TRC resin grade is a 21% PCR(Post Consumer Recycle) contain halogen-free flame retardant polycarbonate featuring transparency, -40 degree C ductility and UL-94 V0 rating for injection molding applications. Excellent impact combined with good flow, all transparent colorability for aesthetics and thin wall flame retardant makes this product an excellent candidate for thin wall applications.
ASIA

FST3403
LEXAN FST3403 is based on Polycarbonate (PC) copolymer high flow resin suitable for injection molding. This halogen-free flame retardant resin is EN45545 R6 HL3 compliant and is targeted for train interior applications (category R6). It also meets requirements of DIN5510-2, NFPA-130 and PN-K-02511 standards. Available in opaque colors.
EUROPEASIAAMERICAS

FST3403T
LEXAN FST3403T is based on Polycarbonate (PC) copolymer high flow resin suitable for injection molding. This halogen-free flame retardant resin is EN45545 compliant and is an ideal candidate for train interior applications such as cladding with an R1 / HL3 rating (e.g. side panels & partition walls) and seating with an R6 / HL3 rating (e.g. back & base shells). It also meets requirements of NFPA-130 standards. Available in transparent and opaque colors.
EUROPEAMERICAS

FST9405
LEXAN FST9405 is based on Polycarbonate (PC) copolymer high flow resin suitable for injection molding. This halogen-free flame retardant resin is OSU55/55 and FAR25.853 compliant and is targeted for aircraft interior applications. Available in opaque colors.
EUROPEASIAAMERICAS

FST9405T
LEXAN FST9405T is based on Polycarbonate (PC) copolymer high flow resin suitable for injection molding. This halogen-free flame retardant resin is OSU55/55 and FAR25.853 compliant and is targeted for aircraft interior applications. Available in transparent and/or translucent colors only.
EUROPEASIAAMERICAS

FST9436
Medium viscosity opaque, low smoke, and OSU 65/65 compliant PC Copolymer
AMERICAS

FST9705
High viscosity Proprietary Polycarbonate Ester, OSU 55/55 compliant, low smoke, flame retardant resin
EUROPEASIAAMERICAS

HFD1014
7 MFR LEXAN HFD Copolymer
EUROPEASIAAMERICAS

HFD1034
7 MFR LEXAN HFD Copolymer UV-stabilized, available in transparent colors only
EUROPEASIAAMERICAS

HFD1212
18 MFR LEXAN High Flow Ductile Copolymer
EUROPEASIAAMERICAS

HFD1232
18 MFR LEXAN High Flow Ductile Copolymer UV-stabilized, available in transparent colors only
EUROPEASIAAMERICAS

HFD1262
19 MFR LEXAN High Flow Ductile Copolymerwith 400 nm cut off, available in transparent colors only
EUROPEASIAAMERICAS

HFD1413
11 MFR LEXAN High Flow Ductile Copolymer
EUROPEASIAAMERICAS

HFD1433
11 MFR LEXAN High Flow Ductile Copolymer UV stabilized, available in transparent colors only
EUROPEASIAAMERICAS

HFD1711
25 MFR LEXAN High Flow Ductile Copolymer
EUROPEASIAAMERICAS

HFD1731
25 MFR LEXAN High Flow Ductile Copolymer UV-stabilized
EUROPEASIAAMERICAS

HFD1810
40 MFR LEXAN High Flow Ductile Copolymer
EUROPEASIAAMERICAS

HFD1830
40 MFR LEXAN High Flow Ductile Copolymer UV Stabilized
EUROPEASIAAMERICAS

HFD1910
55 MFR LEXAN High Flow Ductile Copolymer
EUROPEASIAAMERICAS

HFD1930
55 MFR LEXAN High Flow Ductile Copolymer UV-stabilized.
EUROPEASIAAMERICAS

HFD4211
LEXAN HFD4211 is a 10% glass filled, injection moldable grade designed for high flow and superior surface appearance. Internal mold release.
EUROPEASIAAMERICAS

HFD4271
LEXAN HFD4271 is a 10% glass filled, high flow, impact modified, injection moldable grade designed for high flow and superior surface appearance. HFD4271 has enhanced mold release, impact ductility and broad color space.
EUROPEASIAAMERICAS

HFD4412
LEXAN HFD4412 is a 20% glass filled, injection moldable grade designed for high flow and superior surface appearance. Internal mold release.
EUROPEASIAAMERICAS

HFD4413
LEXAN HFD4413 is a 30% glass filled, injection moldable grade designed for high flow and superior surface appearance. Internal mold release.
EUROPEASIAAMERICAS

HFD4471
LEXAN HFD4471 is a 10% glass filled, medium flow, impact modified, injection moldable grade designed for high flow and superior surface appearance. HFD4417 has enhanced mold release, impact ductility and broad color space.
EUROPEASIAAMERICAS

HFD4472
LEXAN HFD4472 is a 20% glass filled, medium flow, impact modified, injection moldable grade designed for high flow and superior surface appearance. HFD4472 has enhanced mold release, impact ductility and broad color space.
EUROPEASIAAMERICAS

HPF0
40 MFR LEXAN High Flow Ductile Copolymer Healthcare Grade
AMERICAS

HPF1
25 MFR LEXAN High Flow Ductile Copolymer Healthcare Grade
AMERICAS

HPH4404
High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam, gamma and e-beam sterilizable.
EUROPEASIAAMERICAS

HPH4504
High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam, gamma and e-beam sterilizable.
EUROPEASIAAMERICAS

HPH4504H
LEXAN HPH4504H resin is based on high heat Polycarbonate (PC) siloxane copolymer with enhanced autoclavability for medical devices and pharmaceutical applications. Added features of this grade include: Biocompatible (ISO10993 or USP Class VI). EtO, Steam, Gamma and e-Beam Sterilizable.
EUROPEASIAAMERICAS

HPX4
Medium flow specialty polycarbonate – improved processability & autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable.
ASIAAMERICAS

HPX4EU
Medium flow specialty polycarbonate – improved processability & autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable.
EUROPE

HPX4REU
Medium flow specialty polycarbonate – improved processability & autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable.
EUROPE

HPX8R
Very high flow specialty polycarbonate with outstanding processability and ductility. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). ETO sterilizable. Contains mold release.
EUROPEASIAAMERICAS

HPX8REU
Very high flow specialty polycarbonate with outstanding processability and ductility. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). ETO sterilizable. Contains mold release.
EUROPE

HPXS8R
Very high flow specialty polycarbonate with outstanding processability and ductility. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). ETO, e-beam, and gamma sterilizable. Contains mold release.
EUROPEASIAAMERICAS

ML0992
LEXAN ML0992 is a translucent impact modified polycarbonate injection molding (IM) grade with release properties. This resin offers good low temperature ductility in combination with medium flow characteristics, excellent surface aesthetics, excellent knit line strength, and excellent processability with opportunities for shorter IM cycle times d to standard IM PC resins. LEXAN ML0992 resin is a general purpose product available for wide range of opaque colors and may be an excellent candidate for a broad range of applications. .
ASIA

ML6411
LEXAN ML6411 polycarbonate (PC) siloxane resin, is a high flow opaque injection molding (IM) grade with very low temperature ductility characteristics. This grade offers UL94 V0 @ 1.5mm and 5VA @ 3.0mm flame retardancy based on non-chlorine, non-bromine FR systems. LEXAN ML6411 resin offers excellent processing characteristics with opportunity for shorter IM cycle times d to standard PC. This product is available in a wide range of opaque colors and is an excellent candidate for a wide range of electrical applications.
EUROPEASIAAMERICAS

ML6413
LEXAN ML6413 is based on Polycarbonate (PC) copolymer resin. It is an impact modified, flame retardant polycarbonate grade with Br- & Cl-free FR systems. It features improved light shielding capability with good flow, impact and thermal properties targeted for various applications.
EUROPEASIAAMERICAS

ML7664
LEXAN ML7664 polycarbonate (PC) siloxane resin, is a product targeting (profile) extrusion applications requiring extreme low temperature ductility. LEXAN ML7664 resin is a non-FR product available in opaque colors only.
ASIA

ML7689
LEXAN ML7689 polycarbonate (PC) siloxane copolymer resin IS a high viscosity injection molding (IM) grade WITH good processability, offering opportunities FOR shorter IM CYCLE times d TO standard PC resins. This resin offers extreme low temperature (-40 degree C) ductility. LEXAN ML7689resin IS FDA/EU FC compliant available IN OPAQUE colors ONLY AND IS an excellent candidate FOR food contact applications.
EUROPEASIA

MPX1
Lexan* MPX1 polycarbonate (PC) siloxane copolymer resin is a UV stabilized injection molding (IM) grade with release properties. This resin offers good low temperature ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard IM PC resins. Lexan MPX1 resin is a general purpose product available in limited colors and may be an excellent candidate for a broad range of applications.
ASIA

MPX2
LEXAN MPX2 polycarbonate (PC) siloxane copolymer resin is a injection molding (IM) grade with release properties. This resin offers good low temperature ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times d to standard IM PC resins. LEXAN MPX2 resin is a general purpose product available for wide range of colors and may be an excellent candidate for a broad range of applications.
ASIA

MPX3
Improved flow PC with excellent processability and mold release.
EUROPEASIAAMERICAS

SLX1432
Medium viscosity PC copolymer with enhanced UV stabilization and added release agent. Available in opaque colors. Typical minimum color tolerance limit is DE CMC < 1.0
EUROPEASIAAMERICAS

SLX2071T
High viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors
EUROPE

SLX2271T
LEXAN SLX2271T is based on Polycarbonate (PC) copolymer resin. It is an injection moldable, weatherable product that offers enhanced UV stabilization. This medium flow (17 MFR) resin provides good processability with added mold release. Targeted for potential paint elimination through a wide range of high gloss opaque colors. Also available in transparent or tints. SLX2271T is targeted for broad range of automotive, building and construction, electrical, consumer and electronics applications.
EUROPEASIAAMERICAS

SLX2432T
Medium viscosity PC copolymer with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors.
EUROPEASIAAMERICAS

SLX2471T
Medium viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors
EUROPEASIAAMERICAS

SLX2571T
Transparent weatherable PC copolymer for blowmolding/extrusion.
EUROPEASIAAMERICAS

SLX9271T
LEXAN SLX9271T resin is a halogen-free flame retardant polycarbonate copolymer resin with UL-94 V0 rating at 3.0 mm, enhanced UV stabilization and added release agent for injection molding applications. The resin is available in transparent and black opaque color only.
EUROPEASIAAMERICAS

XHT1141
XHT1141 is a high flow, high heat polycarbonate copolymer. It is the lowest heat product in the LEXAN XHT portfolio. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT1171
XHT1171 is an 85 MVR high flow, high heat polycarbonate copolymer enabling high aesthetics, thin wall and complex designs. It is available in a range of opaque colors.
EUROPEASIAAMERICAS

XHT2141
XHT2141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT2143
XHT2143 is a high flow, UV stabilized, high heat polycarbonate copolymer with an HDT/Af of 142 C. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT2146
XHT2146 resin is a high flow, high heat polycarbonate copolymer with improved release performance d to LEXAN XHT2141 resin. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT2171
XHT2171 is a 55 MVR high flow, high heat polycarbonate copolymer enabling high aesthetics, thin wall and complex designs. It is available in a range of opaque colors.
EUROPEASIAAMERICAS

XHT3141
XHT3141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT3143
XHT3143 is a high flow, UV stabilized, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT3143T
XHT3143T is a high flow, UV stabilized, high heat polycarbonate copolymer. It is only available in limited transparent colors
EUROPEAMERICAS

XHT3146
XHT3146 is a high mold release version of XHT3141 high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT3171
XHT3171 is a 38 MVR high flow, high heat polycarbonate copolymer enabling high aesthetics, thin wall and complex designs. It is available in a range of opaque colors.
EUROPEASIAAMERICAS

XHT4141
XHT4141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT4143
XHT4143 is a high flow, UV stabilized, high heat polycarbonate copolymer blend with an HDT/Af of 162C. It is available in a range of opaque and limited transparent colors.
EUROPEASIAAMERICAS

XHT4143T
XHT4143 is a high flow, UV stabilized, high heat polycarbonate copolymer blend with an HDT/Af of 162C.
ASIA

XHT5141
XHT5141 is a high flow, high heat polycarbonate copolymer with a haze onset of 185C. It is available in a range of opaque colors.
EUROPEASIAAMERICAS

XHT5146
XHT5146 is a high flow, high heat polycarbonate copolymer with a haze onset of 185C. It is available in a range of opaque colors.