SABIC’s ULTEM 1010 PEI resin is an amorphous, transparent polyetherimide (PEI) plastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. This inherently flame retardant resin has UL94 V0 and 5VA ratings. ULTEM 1010 Resin is an unreinforced general purpose grade resin offering high heat resistance, high strength and modulus with broad temperature resistance.
SABIC ULTEM is an amber transparent solid, without any additives, it has inherent flame retardancy and low smoke. The oxygen index is 47%, the combustion grade is UL94-V-0, and the density is 1.28~1.42g/ cm3. PEI has strong high temperature stability, even if it is unreinforced PEI, it still has good toughness and strength. Therefore, the superior thermal stability of PEI can be used to make high-temperature heat-resistant devices. It has excellent mechanical properties, electrical insulation properties, radiation resistance, high and low temperature resistance and wear resistance, and can penetrate microwaves. PEI also has good flame retardancy, chemical resistance and electrical insulation properties. The glass transition temperature is very high, reaching 215°C. PEI also has very low shrinkage and good mechanical properties in the same direction. Adding glass fiber, carbon fiber or other fillers can achieve the purpose of reinforcement modification; it can also form a heat-resistant polymer alloy with other engineering plastics, and can be used for a long time at a working temperature of -160-180 °C.
ULTEM PEI features include:
High strength, high rigidity, wear resistance and dimensional stability at high temperature
Amber transparent solid, without adding any additives, it has inherent flame retardancy and low smoke, the oxygen index is 47%, and the combustion rating is UL94-V-0
The density is 1.28~1.42g/cm3, the glass transition temperature is 215°C, the heat distortion temperature is 198~208°C, it can be used for a long time at 160~180°C, and the allowable intermittent* use temperature is 200°C
It has excellent mechanical strength, electrical insulation performance, radiation resistance, high and low temperature resistance, fatigue resistance and formability; adding glass fiber, carbon fiber or other fillers can achieve the purpose of reinforcement and modification
The chemical structure is based on the repeating units of aromatic imides and ethers. It is stable to many chemicals, such as most hydrocarbons, alcohols, and fully halogenated solvents. It is soluble in special halogenated solvents. .
Widely used in high-strength air temperature sensors in the automotive industry, fuel system components, lamp holders, reflectors, jet engine parts, heat-resistant and flame-retardant decorative parts on aircraft. PEI is also widely used in electronic appliances, mechanical parts, medical utensils, daily necessities and packaging supplies.
PEI material performance table
Unreinforced Standard 1000,1000F,1000P,1000R
easy flowDynamic 1010,1010F,1010R
Pigmented resin 1100,1100F,1100R ,1110,1110F
Medium heat resistance 1285, LTX300A, LTX300B
Reinforced glass fiber reinforced 2100,2100N,2100R,2110,2110N,2110R,2200,2200R,2210,2210R,2300,2300N,2300R 2310,2310R,2400,2410,2410R
Grinding Fiberglass Reinforced 2212,2212R,2312,2313
Glass fiber/mineral reinforced 3451,3452
Carbon Fiber Reinforced 7201,7801
Abrasion Resistance Unreinforced 4001 Reinforced 4000,4211
Change in impact resistance HTX1010F, HTX1050F, HTX2000F, HTX2001F
Chemical resistance unenhanced CRS5001, CRS5011, CRS5011F, CRS5011R
Enhanced CRS5111,CRS5112,CRS5711,CRS5201,CRS5201R,CRS5211,CRS5211R ,CRS5301 ,CRS5311
Aerospace Resin Unreinforced 9075,9076 Reinforced AR9100,AR9200,AR9300
Hybrid Grade PEI/PCE Hybrid ATX100,ATX100F,ATX100R,ATX200,ATX200F,ATX200R
Mixed Grade PEI/PPO Hybrid MD133
Extrusion Aerospace Resin 8015,D9065
Need ( Ultem SABIC PEI HU1010 ) Resin Quotation, sample, UL/ROHS/REACH/MSDS/COA Reports and certificates,Please contact us.
Reviews
There are no reviews yet.